Bios Configuration Power On By Pci Devices Wake On Lan_thumb.jpg 1 Ane of the best advantages of mod PC's is that you can automate merely about anything. The Wake On LAN features is well-known, but very few use it, why is that? Hither'south how to use the WOL feature to start your PC over the LAN or even Cyberspace!

Kickoff Footstep: Enable Unproblematic TCPIP services

Earlier y'all can utilize Wake On LAN enable this Windows feature:

one. Step Enter Windows features into search bar and click on the item that pops upward

2. Step Make sure to select the checkbox Simple TCPIP services and click OK

2nd Footstep: Enable Wake On Lan Via Avant-garde Network Adapter Backdrop

1. Step The first stride is to actually enable your network adapter to support Wake On Lan (brusk: WOL) or even if you successfully send a Wake On LAN signal your PC will not react to information technology.

ii. Stride Open up upwardly the Device Director by inbound Device Managing director into the search bar on your Showtime Menu

iii. Step Uncollapse Network Adapters and right-click on your main network adapter then on Properties. My main network adapter is called Realtek PCIe GBE Family unit Controller #2. Adapters labeled equally Virtual are obviously no real physical adapters. If you have multiple adapters, just enable Wake on LAN for all of them.

Network Adapter Realtek Properties.png 1

iv. Footstep Get to the tab Advanced and scrol downward the listing until you find the options:

  • Wake on Magic Package (this is important)
  • Wake on pattern match
  • WOL & Shutdown Link Speed
  • Shutdown Wake-On-Lan

Enable Wake On Lan Magic Packet.png 1

5. Step Simply select Enabled from the dropdown for all available options. If y'all likewise want to shutdown your PC via Wake-On-LAN make sure to enable the Shutdown option also.

I haven't really tested Wake on pattern friction match yet, simply it'due south probably very useful in some cases.

Ok, that's all for now.

Third Footstep: Enable Wake On LAN via BIOS

Next, you actually take to enable WOL via the motherboard BIOS. Go along in listen non all motherboards actually back up Wake-On-LAN. I'm using the Asus M4a89gtd pro and it supports WOL, then look that up every bit well. If you're having trouble entering the BIOS, go along striking DEL right afterwards turning your computer on – eventually it will open up.

1. Step Read your motherboard manual how to enter the BIOS

ii. Pace Read your motherboard manual to find out what setting you have to enable to transport WOL signals. Keep in listen some motherboard manufacturers like ASUS brand it really too difficult for end users and utilise cryptic names for Wake on LAN features.

Hither's what I turned on in my BIOS. Well, I really took a few quick shots to bear witness you lot what it would look like then yous'd better be able to follow this guide:

Within the BIOS go to the tab "Ability" using the arrow keys. The APM configuration allows yous to set various "Ability On Features". Important: This might not be bachelor in your own BIOS, so expect for similar entries.
Bios Configuration Apm Wake On Lan 1

There are various options to Power On your PC:

  • Power On By PCI/PCIE Device
  • Power On Past PS/2 Devices
  • Ability On Past Ring
  • Power On Past RTC Alarm

Asus Bios Configuration Power On By Pci Devices Wake On Lan 1

3. Step Turn on the pick Power On By PCI/PCIE Device if you want to wake up your PC using wakeonlan signals.

Find Your Physical MAC Address So You Can Really Send WOL Signals

Ane of the pre-requisites of sending a Wake signal is to really have the MAC address of the PC that you lot want to wake upwardly.

We accept various great tutorials and tools on our site that explain how to think the MAC accost of your PC

In short:

1. Step Open a control prompt and enter ipconfig -all

ii. Step Find something like Ethernet adapter Local Area Connexion and write down the number Physical Address e.g. 48-5B-39… etc

Information technology could look like this:
Finding MAC address in Windows 8

Delight read our tutorial (link above) if yous struggle finding the MAC address

Of import: The MAC address that ipconfig -all gives you needs to exist rewritten, replace the dashes with a colon!

Finally: Sending The Wake-On-LAN Signal From UBUNTU

I wanted to send out the wakeonlan command from an Ubuntu PC to my Windows PC. Thank you to yum/apt you can easily go the necessary tools using one command.

Ubuntu:apt-get install wakeonlan

So type in wakeonlan 48:5b:39:27:00:14:9B

Finally: Sending The Wake-On-LAN Signal From Windows

If yous want to transport the WOL point from a Windows PC to a Windows PC, I highly recommend that yous download a free WOL utility.

1. Step Head over to http://www.matcode.com/wol.htm to download MC-WOL.EXE (I tested it, information technology's safe)

2. Step When that is done, open a command prompt and use CD to change the directory to the location of MC-WOL.EXE (e.m. C:/Download/)

iii. Step Then enter MC-WOL 48:5b:39:27:00:fourteen:9B

Important: The MAC accost that ipconfig -all gives y'all needs to be rewritten, replace the dashes with a colon!

Possible Issues You Tin can Meet

If you are running a firewall either on your Windows PC or your Ubuntu PC you lot admittedly need to configure it to allow port 9 UDP. In some cases it may be necessary to besides unblock port seven, merely I'd accept to exercise more research on that.

Please post your questions below and give me some days to go back to you.